Shop Class: [1/11]

[manofthemullet.livejournal.com]

Upon entering the classroom the students will find that it has been transformed into a laboratory, filled with various types of chemicals and electronic equipment.

What's strange is that there appears to be a locked door for each student.

"Today's assignment is situational. You have been locked inside this lab by an electronic lock on the door. The door lock itself cannot be picked by any means and you cannot removed the door by its hinges or any other physical means. There is a keypad by the door that controls the lock."

"Today your goal is to find a way to open the door using only what's in the lab and the standard shop student tool kit: A virtual swiss army knife and a roll of duct tape."

[OOC: Feel free to mod whatever you might find in the lab as long as it is not a code to the door or a set of keys. Hints for some possible solutions will be provided in one of the OCD tags below for those students who don't have a background in lockpicking or electronics.]

Comments

Re: Assignment: [1/11]

[sheltered-texan.livejournal.com]

Fred uses her knife to pry open the face plate, studying the circuits for a few minutes she walks over to the electronic equipment. The circuit wires are the standard, red, yellow, black and blue. Pulling out some splicer connectors Fred uses her swiss knife to splice the red and blue wires, pinching them for a moment she pushes the spliced ends into the connector. Doing the same to the red and yellow she then runs the a piece of copper wiring inside the length of each wires plastic encasement and waits. After a few moments she starts to hit the keys in a seemingly random pattern waiting to hear it beep back at her. Finally after hitting the same four numbered sequence several times the door opens. She smiled at Mac.